VFD customer display installation

- Nov 07, 2019-

VFD customer display installation


(1) Connect the customer display screen, connecting pipe and base, and the communication line passes through the middle.

   

(2) Clamp the communication cable into the base card holder, attach the clamp at the outlet, screw on the screw, and fix the weighted iron on the base.

   

(3) Insert the large 4P plug of the guest power supply into the main 4P DC12V power supply interface, or connect the round hole DC12V power interface to the adapter interface, connect the DB9 pin serial port plug and the host serial port on the communication line, and display the DIN6 interface and serial port of the customer. Docking DIN6 interface. After the check is correct, the power can be tested.

   

(4) The customer display can be adjusted up and down, left and right.

錗G_2053

Previous:The VFD customer display Next:VFD Language adjustment test