How to Set Up a Barcode Scanner

- Jul 12, 2019-

 

How to set up a barcode scanner? Including the factory reset settings, suffix settings, scan mode settings and other bar code scanner common problem settings are here, Xingtong IoT provides reference for your finishing.

 

    1, restore factory settings

 

    This setting is the most important setting in the scanner setting. In general, the bar code gun failure (such as the inability to read barcodes) can be solved by this setting.

 

    2, the prefix and suffix are added.

 

    In some barcode applications, it is required to read the uploaded barcode data with a certain prefix and suffix to adapt to some functions of the system. With this setting, the prefix and suffix can be conveniently added.

 

    3, the barcode data bit interception settings

 

    In some barcode applications, it is required to read the uploaded barcode data to delete the first few characters or the last few characters to adapt to some functions of the system. With this barcode scanner setting, the number of characters can be easily deleted for the barcode reader .

 

    4, Serial communication production settings

 

    It can be set up to facilitate the modification of serial parameters such as baud rate, parity, stop bit, data bit, handshake protocol, etc.

 

    5, Scan mode settings

 

    At present, the quality of scanner can be scanned in a variety of ways, such as manual button scan, light-on-bright scan, light-blinking scan, self-inductive barcode scanning, which can be set through this barcode scanner, conveniently in various Switch between modes.

 

    6, Code system opening settings

 

    In order to speed up the decoding speed of bar code readers, some supported bar code codes are often locked. By default, the scanner cannot read them. If you actually encounter this type of locked bar code, you can use it to set , the code system is quickly and easily opened.

 

    7, Interface type settings

 

    When it performs the interface data line replacement,they can be set to perform interface mode conversion, so that they can be used normally in the interface mode.

 

    8, The buzzer settings

 

    When the barcode scanner is used alternately in a noisy environment and in a quiet environment, the bar code scanner can be used to control the scanning sound, better suit the environment's sound requirements. 


Previous:What scanner is suitable for warehouse storage Next:What Type Scanner can check out quickly On supermarket?